AIRAID Jr Kit for 2011-2014 Ford Mustang Helps Boosts Horsepower and Acceleration
- Nov 29, 2016
A 200-cubic inch six-cylinder engine that delivered 101-horsepower and a 260-cubic inch V8 that produced 164-horsepower were available to power the initial models. However, the car was upgraded in time for the traditional opening of the 1965 model year to include two new engines - a modification of the six-cylinder, which offered a boost to 120-horsepower and an enhanced V8 that jumped the horsepower to 210. Starting in 1969, Ford added new performance and decorative options including functional and non-functional air scoops, cable and pin hood tie downs, wing and chin spoilers. Performance packages were also unveiled including the Mach 1, the Boss 302, and Boss 429. The fifth generation started off with a redesigned model that was similar to the late 1960s styling. A cast-iron block 4.0-liter SOHC V6 engine delivered 210-horsepower and an aluminum block 4.6-liter SOHC 3-valve Modular V8 with variable camshaft timing produced 300-horsepower for the GT. The 2010 version went through an exterior enhancement that included sequential LED taillights and the introduction of a revised 4.6-liter V8 that produced 315-horsepower at 6000 rpm and 325-lb-ft of torque at 4255 rpm. This Mustang also featured new spring rates and dampers, traction and stability control system that was standard on all models.
The AIRAID 451-745 Jr kit is designed for the 2011 to 2014 Mustang with the 3.7-liter V6 engine. It is constructed to replace the factory intake tube and paper filter to create a straighter path for clean airflow to reach the engine. The intake kit includes the AIRAID 851-500 dry synthetic direct-fit replacement filter and low restriction polyethylene intake tube. The washable and reusable air filter features a two-layer media of SYNTHAMAX® material. The inner filter media has two distinct layers featuring synthetic materials that have separate performance characteristics. The outer layer made of synthetic needle felt polyester material catches contaminants. The inner layer of wet-laid/chemical bonded rayon and polyester captures any contaminants that may have penetrated the first layer. AIRAID offers an air filter cleaning kit that is specially formulated to cleanse and recharge the air filter after each 30,000 to 50,000 miles of normal driving. So if you properly clean the filter when you are supposed to, then it will perform for the lifetime of your vehicle. The air intake is custom made to fit 2011 to 2014 Mustangs. It is easy to install using common hand tools. Drilling is not required. The AIRAID 451-745 Jr. intake kit is designed to fit the following vehicle applications: 2014 FORD MUSTANG 3.7L V6 Fuel Injection - All Models | |||
 | |||
| | |||
| |||
| | |||
