Latest News

2011, 2012 Silverado and Sierra AIRAID Air Intake Delivers Street Legal Power in About 1 Hour

AIRAID air intake for 2011-2012 Chevrolet Silverado/GMC Sierra 2500HD & 3500 diesel engines

The AIRAID 2011-2012 Chevrolet Silverado/GMC Sierra 2500HD & 3500 diesel intake air box reuses the factory cold air fender inlet and adds a forward-facing inlet & lower snorkel

An engine is essentially a giant air pump, and anything that can be done to eliminate restrictions on the intake and / or the exhaust, the better the engine will run and the more power it will make. While this holds true with any engine, it’s most dramatic with modern diesels. Large displacements and variable vane turbos demand incredible amounts of air in order to run at peak efficiency, yet auto manufacturers usually sacrifice airflow in order to keep under hood noise to a minimum. This is what makes aftermarket intakes and exhaust systems so effective: they nearly eliminate restrictions and enable an engine to breathe easier, and the result is often more power. Best of all, quality aftermarket intake systems, like those from AIRAID, offer a simple bolt-on installation, making them perfect for shade tree mechanics.

AIRAID air intake on the 2011 Chevy Silverado 2500HD with a 6.6L LML Duramax Diesel engine

The test mule used for install and dyno runs of AIRAID intake 200-281 was a 2011 Chevy Silverado 2500HD with a 6.6L LML Duramax Diesel engine

AIRAID, the Performance Intake Company, is one of the most established names in the aftermarket air intake business. AIRAID has been catering to the needs of diesel enthusiasts for many years with a wide selection of diesel pickup truck intake systems. Often the first to market with an intake for new diesel models, AIRAID is well known for utilizing quality components that fit right and work right out of the box with no tuning required. Testing was performed on AIRAID diesel air intake, number 200-281, to validate the effectiveness of this AIRAID air intake system.
 

Under the hood of the 2011 Chevy Silverado 2500HD with a 6.6L LML Duramax Diesel engine

Auto manufacturers usually sacrifice airflow in order to keep under hood noise to a minimum which is what makes aftermarket air intakes, like those from AIRAID, so effective

The test mule used was a 2011 Chevy 2500HD with a 6.6L LML Duramax engine. The truck had a leveling kit and some slightly larger tires than stock, but otherwise was just how it left the factory. The stock intake helps keep the engine noise to a minimum, but those noise-cancelling properties come at the cost of airflow and overall performance. The AIRAID MXP Cold Air intake system for 2011-2012 Chevrolet Silverado/GMC Sierra 2500HD & 3500 models with a Duramax Diesel engine replaces everything from the throttle body out.

AIRAID air intake tube for the 2011 Chevy Silverado 2500HD with a 6.6L LML Duramax Diesel engine

The smooth interior walled molded AIRAID 2011-2012 Chevrolet Silverado/GMC Sierra 2500HD & 3500 Duramax intake tube includes provisions for all of the factory sensors

This AIRAID MXP Series intake includes a new roto-molded intake box, new intake tube, velocity stack, couplers, hardware, and of course an AIRAID air filter. The AIRAID air box included in the 2011-2012 Chevrolet Silverado/GMC Sierra 2500HD & 3500 diesel intake system reuses the factory cold air inlet duct in the fender but also adds a forward-facing inlet and a lower “snorkel” to grab cool air from behind the front bumper.

Air box for the AIRAID air intake for the 2011 Chevy Silverado 2500HD with a 6.6L LML Duramax Diesel engine

The AIRAID 2011-2012 Duramax MXP Intake air box dwarfs the factory unit to accommodate a large air filter, and greatly increase the amount of cool air available to the engine

The first stage of the installation process is to disconnect the negative cables on both batteries. This helps prevent check engine lights and also forces the engine to re-learn its tuning once the installation is complete. Begin removing the factory components by pulling out the stock intake tube which is held in place with simple worm clamps. The stock air filter box is removed by pulling upward firmly to release the box from its rubber grommets. Use caution when removing the stock intake to make sure you don’t damage any wiring or other under hood components. Beneath the stock air filter box is a flat metal panel that needs to be removed to make room for the large AIRAID air box. It is held in place with four 10mm bolts. The plate can be set aside but the bolts will be re-used for installation of the AIRAID air intake.

AIRAID air intake installed in the 2011 Chevy Silverado 2500HD with a 6.6L LML Duramax Diesel engine

With the installation complete, the AIRAID 2011-2012 Chevrolet Silverado/GMC Sierra 2500HD & 3500 Duramax diesel air intake system looks great and fits well

The new AIRAID MXP air box dwarfs the factory box. Not only does it accommodate a much larger filter, but it also greatly increases the amount of cool outside air available to the filter. The 2011-2012 Chevrolet Silverado/GMC Sierra 2500HD & 3500 Duramax MXP air intake is an open-element design that uses the hood as a lid for the new air box. Weather stripping along the top of the AIRAID air box helps to keep engine compartment air isolated from the filter. The AIRAID box drops right in place of the factory air box and is held in place with three of the four 10mm factory bolts removed previously.

Dyno testing the AIRAIR air intake for the 2011 Chevy Silverado 2500HD with a 6.6L LML Duramax Diesel engine

AIRAID’s in-house all-wheel-drive Mustang chassis dyno showed an estimated gain of 19 horsepower and 34 lb-ft of torque at the wheels of a 2011 Chevy Silverado 2500HD 6.6L diesel

Much thought went into the new AIRAID 2011-2012 Chevrolet Silverado/GMC Sierra 2500HD & 3500 Duramax intake tube. Not only does it include provisions for all of the factory sensors and such, it incorporates a velocity stack into the filter mount that optimizes airflow similar to the venturis on a carburetor. Additionally, the AIRAID air intake tube has smooth interior walls rather than the factory accordion-style tube. There are a few things that need to be transferred from the original intake to the new one; including the filter minder, and the mass airflow sensor (MAF). The MAF sensor is attached to the stock intake box with torx screws. AIRAID supplies the correct-size bit to remove the screws and new allen-head screws to attach the MAF sensor to the AIRAID tube.

AIRAID air intake air filters include red SynthaFlow and red, black and blue SynthaMax filter media

AIRAID offers most of its air intake systems in two filter styles and three colors: red oiled cotton blend filters, or fully synthetic SynthaMax dry filters in red, blue, or black

AIRAID supplies a hump hose and stainless steel clamps to connect the intake tube to the throttle body. It is recommended to position the hump hose and clamps on the throttle body first and then insert the AIRAID 2011-2012 Chevrolet Silverado/GMC Sierra 2500HD & 3500 Duramax intake tube into place between the box and the throttle body. It takes a little finesse to get everything positioned just right, but once it’s in, everything fits like a glove. The lower portion of the intake tube secures to the MXP air box using four stainless allen-head bolts. The filter attaches to the intake tube itself, so there’s no need for another coupler at the intake box.

With the installation largely complete, the weather stripping can be installed on the top edge of the air box. This weather stripping is important because it seals against the underside of the hood, which keeps hot engine air away from the filter. The last piece of the puzzle is the filter itself. AIRAID offers most of its air intake systems in two filter styles and three basic colors. There is the intake with a traditional red oiled media filter, 200-281, or identical intake systems with SynthaMax full synthetic dry filter media in red (201-281), blue (202-281), or black (203-281). AIRAID air filters and air intake systems carry a no-hassle lifetime warranty.

AIRAID MXP Cold Air intake systems for 2011-2012 Chevrolet Silverado/GMC Sierra 2500HD & 3500 models with a Duramax Diesel engine:

200-281 AIRAID Cold Air Intake - Red Oiled Premium Air Filter
201-281 AIRAID Cold Air Intake - Red Dry Synthetic Premium Air Filter
202-281 AIRAID Cold Air Intake - Black Dry Synthetic Premium Air Filter
203-281 AIRAID Cold Air Intake - Blue Dry Synthetic Premium Air Filter

With the installation complete, the AIRAID 2011-2012 Chevrolet Silverado/GMC Sierra 2500HD & 3500 Duramax intake looks great and fits well. A decal noting the Exemption Order (EO) number granted by the California Air Resources Board (CARB) should be visibly placed under the hood indicating that this AIRAID air intake kit is street legal in all 50 states. No tuning is required to experience enhanced performance with the AIRAID 2011-2012 Chevrolet Silverado/GMC Sierra 2500HD & 3500 Duramax intake system. Performance data from AIRAID’s in-house all-wheel-drive Mustang chassis dyno showed an estimated gain of 19 horsepower and 34 lb-ft of torque at the wheels. This AIRAID intake kit helps improve power delivery throughout the rpm range for substantial drivability improvements. Not bad for a simple bolt-on performance upgrade that took about an hour to perform.

Find additional Chevy or GMC Duramax Diesel upgrades from AIRAID, The Performance Intake Company, using the AIRAID Find Products search. Use the AIRAID Dealer Search tool to find an authorized AIRAID Performance Filters or Performance Intake Systems dealer near you.


AIRAID PRODUCT SEARCH     WHERE TO BUY AIRAID

2015 SEMA Show Success for AIRAID with New Products, Celebrities, & Custom Vehicles

AIRAID carbon fiber air intake system equipped 2014 Chevrolet Camaro Z28

Probably the most prominent feature of the AIRAID SEMA Booth was the AIRAID carbon fiber air intake system equipped 2014 Chevrolet Camaro Z28 owned by Ken Thwaits

Each year, the Specialty Equipment Market Association (SEMA) presents an enormous trade show in Las Vegas, Nevada at the Las Vegas Convention Center. At this show SEMA member companies and manufacturers unveil their latest offerings, while buyers, distributors and members of the press walk their feet off trying to see it all. The variety of products to see is astonishing, ranging from restyling accessories and automotive organizers to engine parts, restoration supplies, street-rod components and safety enhancements.

7-time 250cc AMA Supercross champion, and professional short course off-road racer Jeremy McGrath

7-time 250cc AMA Supercross champion, and professional short course off-road racer Jeremy McGrath stopped by the AIRAID 2015 SEMA Show booth and signed autographs

While the annual SEMA show is meant to bring the industry together to do business it has also become a vacation destination. As if there wasn't already plenty to do and see in Las Vegas, Nevada, the SEMA show gathers the finest examples of custom vehicles, industry giants, and celebrities into an area of approximately 3.2 million square feet. For 2015 the AIRAID SEMA Show Booth, number 24131, was located in the Las Vegas Convention Center central performance hall not too far from the Chevrolet SEMA booth.

Professional off-road short course racer Corry Welle

Professional off-road short course racer Corry Weller made an appearance at the AIRAID 2015 SEMA Show Booth on Wednesday November 4, 2015 for an autograph session

As with past years, AIRAID, The Performance Intake Company, had a variety of exciting happenings in its 2015 SEMA Show booth. Probably the most prominent feature of the AIRAID SEMA Booth was the AIRAID carbon fiber air intake system equipped 2014 Chevrolet Camaro Z28 owned by Ken Thwaits. Virtually nothing in, or on, Ken's Z/28 Camaro was left untouched. As impressive as the 7.0-liter (427 cubic-inches) Chevy LS7 engine is from the factory, Ken had the engine hand built by Mast Motorsports with an RHS block and Black Label heads to produce upwards of 720 naturally aspirated horsepower.

AIRAID 2015 Ford F150 AIRAID air intakes for the 5.0L V8, 2.7L V6, & 3.5L EcoBoost

Several of AIRAID's newest product offerings were on display in the AIRAID 2015 SEMA Show booth; most notably 2015 Ford F150 AIRAID air intakes for the 5.0L V8, 2.7L V6, & 3.5L EcoBoost

Several of AIRAID's newest product offerings were on display further back in the AIRAID 2015 SEMA Show booth. Most notably were the soon to be released to the public 2015 Ford F150 AIRAID air intake systems for the 5.0L V8, as well as the 2.7L & 3.5L Ford EcoBoost engines. In fact, Stratasys, the 3D Printing Solutions Company, had one of its 3D printers inside the AIRAID 2015 SEMA Show booth actively printing AIRAID Intake components. The folks from Stratasys brought a fully 3D printed version, minus the hose clamps, of an AIRAID 2015 F150 5.0L V8 air intake system to showcase the company's 3D printing capabilities.

3D printed AIRAID 2015 F150 5.0L V8 air intake system

The folks from Stratasys brought a fully 3D printed version, minus the hose clamps, of an AIRAID 2015 F150 5.0L V8 air intake system to showcase the company's 3D printing capabilities

The AIRAID 2015 SEMA Show booth wouldn't be complete without celebrity racer guest appearances and autograph sessions. 7-time 250cc AMA Supercross champion, and professional short course racer Jeremy McGrath as well as professional off-road short course racer Corry Weller made an appearance at the AIRAID 2015 SEMA Show Booth. Corry Weller was at the AIRAID SEMA 2015 booth on Wednesday November 4, 2015 from 2:00 PM to 3:00 PM signing autographs, while Jeremy McGrath stopped by the next day on Thursday November 5, 2015 and signed autographs from 12 noon until 1 PM.

There are always plenty of custom cars, trucks, and motorcycles to see at the SEMA show in Las Vegas, Nevada. AIRAID was well represented throughout the 2015 SEMA Show at the Las Vegas Convention Center. Inside the Trim Parts Inc. / RPUI Inc. booth in the Central hall was a 1968 Chevy Camaro SS Convertible sporting an AIRAID UBI F-Body air intake system. Not too far away in the Covercraft Industries SEMA Show booth was a 2015 Ford Mustang V6 with AIRAID MXP air intake system, number 452-327. Besides the performance central hall, AIRAID could be found in the upper south hall representing the brand to truck enthusiasts.

AIRAID, The Performance Intake Company, would like to thank its industry friends and partners for making the 2015 SEMA Show a success. Now that the SEMA 2015 craze is fading from memory, it's time for AIRAID to get back to work developing advanced AIRAID air intake systems for 2016 models. Find performance upgrades from AIRAID, The Performance Intake Company, for your vehicle using the AIRAID Find Products search. Use the AIRAID Dealer Search tool to find an authorized AIRAID Performance Filters or Performance Intake Systems dealer near you.

1968 Chevy Camaro SS Convertible with a AIRAID UBI F-Body air intake system

Inside the Trim Parts Inc. / RPUI Inc. booth in the Central hall was a 1968 Chevy Camaro SS Convertible sporting an AIRAID UBI F-Body air intake system

Chevy Silverado in the Steelcraft Booth at SEMA 2015

Besides the performance central hall, AIRAID could be found in the upper south hall representing the brand to truck enthusiasts; including this Silverado in the Steelcraft Booth

2015 Ford Mustang V6 with AIRAID MXP air intake system, number 452-327

Not too far away from the AIRAID Booth in the Covercraft Industries SEMA Show booth was a 2015 Ford Mustang V6 with AIRAID MXP air intake system, number 452-327


AIRAID PRODUCT SEARCH     WHERE TO BUY AIRAID

Late-Model MOPAR Chrysler & Dodge Muscle Car Options to Increase Power & Performance

AIRAID Cold Air Dam (CAD) System 350-210 fits 2011-2015 Dodge Challengers, Chargers, and Chrysler 300Cs equipped with a V6 engine as well as the 5.7L and 6.4L HEMI V8 engines

AIRAID Cold Air Dam (CAD) System 350-210 fits 2011-2016 Dodge Challengers, Chargers, and Chrysler 300Cs equipped with a V6 engine as well as the 5.7L and 6.4L HEMI V8 engines

Never one to shy away from a fight for late-model muscle supremacy, Dodge offers the Challenger and Charger, while Chrysler has the 300C aimed more toward the luxury car market

Never one to shy away from a fight for late-model muscle supremacy, Dodge offers the Challenger and Charger, while Chrysler has the 300C aimed more toward the luxury car market

The muscle car wars are back in full swing, with the Big Three steadily cranking out more powerful versions of their respective late-model performance cars. Never one to shy away from a fight for late-model muscle supremacy, Dodge offers the potent Challenger and Charger, while Chrysler has the 300C that is aimed slightly more toward the luxury car market. All three vehicles have three engine choices, the 3.6L V6, the legendary 5.7L Hemi, and the fire-breathing 6.4L HEMI equipped SRT-8. These engines all make decent power, but enthusiast know there is always more power to be had under the hood. AIRAID once again delivers what performance enthusiasts demand with two types of Cold Air Intakes that can increase power with an easy bolt-on installation.

Dodge Challenger, Charger, and Chrysler 300 models have three engine choices; the 3.6L V6, the legendary 5.7L Hemi, and the fire-breathing SRT-8 models come with a 6.4L HEMI V8

Dodge Challenger, Charger, and Chrysler 300 models have three engine choices; the 3.6L V6, the legendary 5.7L Hemi, and the fire-breathing SRT-8 models come with a 6.4L HEMI V8

The AIRAID 2011-2016 Dodge Challenger, Charger, and Chrysler 300 3.6L V6 MXP air intake system can be equipped with a red oiled filter, red dry filter, black dry filter, or blue dry filter

The AIRAID 2011-2016 Dodge Challenger, Charger, and Chrysler 300 3.6L V6 MXP air intake system can be equipped with a red oiled filter, red dry filter, black dry filter, or blue dry filter

AIRAID offers a Cold Air Dam (CAD) System that fits 2011, 2012, 2013 2014, 2015 and 2016 Dodge Challengers, Chargers, and Chrysler 300C models equipped with a V6 engine as well as the 5.7L and 6.4L HEMI V8 engines. These systems consist of metal cold air dam panels that replace the factory air filter box. These panels bolt together and keep the air filter isolated from hot engine compartment air while adding additional areas for the engine to draw in cool outside air. Weather stripping positioned along the top of the panels seals against the hood and further isolates the filter from hot engine compartment air. The panels make room for a large premium AIRAID filter that is available in a variety of colors and media types. A filter adapter and short coupler connect the AIRAID assembly to the factory intake tube, completing the system. The CAD systems for all three engines are as follows: 350-210 includes a red oiled filter; 351-210 comes with a dry red filter; 352-210 also uses a dry filter, but in black, and; 353-210 has a dry blue filter.

AIRAID 2011-2016 Dodge Challenger, Charger, and Chrysler 300 5.7L HEMI MXP air intakes are available with a red oiled filter, red dry filter, black dry filter, or a blue dry filter

AIRAID 2011-2016 Dodge Challenger, Charger, and Chrysler 300 5.7L HEMI MXP air intakes are available with a red oiled filter, red dry filter, black dry filter, or a blue dry filter

AIRAID’s MXP Series Cold Air Intake Systems take things one step further. The MXP Series intake for MOPAR muscle consists of a complete replacement roto-molded intake box that drops directly in place of the factory air box and filter. Like the CAD system, the MXP intake box has weather stripping positioned along the top of the box that seals against the underside of the hood, effectively using the hood as a “lid” for the intake box. The AIRAID box utilizes the factory cold air inlet duct and also adds more forward-facing area to draw in cool outside air. A new engine-specific intake tube connects the intake box to the throttle body. Constructed of cross-linked polyethylene, the intake tube is designed to optimize airflow to the engine and has provisions for all of the factory sensors and fittings, so no modifications are needed. An oversize premium filter completes the system.

AIRAID 2011-2016 Dodge Challenger SRT, Charger SRT, and Chrysler 300 SRT 6.4L HEMI MXP air intake systems can be purchased with a red oiled filter, or red, black, and blue dry air filters

AIRAID 2011-2016 Dodge Challenger SRT, Charger SRT, and Chrysler 300 SRT 6.4L HEMI MXP air intake systems can be purchased with a red oiled filter, or red, black, and blue dry air filters

The part numbers of the AIRAID 2011-2016 Dodge Challenger, Charger, and Chrysler 300 3.6L V6 MXP air intake systems are: 350-317 red oiled filter, 351-317 red dry filter, 352-317 black dry filter, 353-317 blue dry filter. The AIRAID 2011-2015 Dodge Challenger, Charger, and Chrysler 300 5.7L HEMI MXP air intake systems are:  350-318 red oiled filter, 351-318 red dry filter, 352-318 black dry filter, 353-318 blue dry filter. The AIRAID 2011-2015 Dodge Challenger, Charger, and Chrysler 300 6.4L HEMI MXP air intake systems are: 350-319 red oiled filter, 351-319 red dry filter, 352-319 black dry filter, 353-319 blue dry filter.

MOPAR 5.7L Hemi, and the fire-breathing SRT-8 6.4L HEMI engines all make decent power, but muscle car enthusiasts know there is always more power to be had under the hood

MOPAR 5.7L Hemi, and the fire-breathing SRT-8 6.4L HEMI engines all make decent power, but muscle car enthusiasts know there is always more power to be had under the hood

Both the CAD and MXP systems are available with a variety of filter choices. AIRAID premium filters are offered with an oiled filter media in red or dry filter media in red, blue, or black. Both filter types offer excellent airflow without sacrificing filtration and are washable and reusable. Like the rest of AIRAID’s Cold Air Intake Systems, the Challenger / Charger / Chrysler 300C intake systems do not require tuning and simply bolt into place. AIRAID products are proudly made in the USA and are backed with a Limited Lifetime warranty.

Find additional late-model MOPAR performance upgrades from AIRAID, The Performance Intake Company, using the AIRAID Find Products search. Use the AIRAID Dealer Search tool to find an authorized AIRAID Performance Filters or Performance Intake Systems dealer near you.


AIRAID PRODUCT SEARCH     WHERE TO BUY AIRAID

Jeremy McGrath & Corry Weller Autographs At AIRAID 2015 SEMA Show Booth # 24131

7-time 250cc AMA Supercross champion Jeremy McGrath and pro off-road short course racer Corry Welle

7-time 250cc AMA Supercross champion Jeremy McGrath and pro off-road short course racer Corry Weller will be at the AIRAID 2015 SEMA Show Booth # 24131 signing autographs

Each year, the Specialty Equipment Market Association (SEMA) presents an enormous trade show in Las Vegas, Nevada at the Las Vegas Convention Center. At this show SEMA member companies and manufacturers unveil their latest offerings, while buyers, distributors and members of the press walk their feet off to see it all. The variety of products to see is astonishing, ranging from restyling accessories and automotive organizers to engine parts, restoration supplies, street-rod components and safety enhancements.

While the annual SEMA show is meant to bring the industry together to do business it has also become a vacation destination. As if there wasn’t already plenty to do and see in Las Vegas, Nevada, the SEMA show gathers the finest examples of custom vehicles, industry giants, and celebrities into an area of approximately 3.2 million square feet. For 2015 AIRAID, The Performance Intake Company, has invited two celebrity racers to spend some time in SEMA Show Booth 24131 to sign autographs for show attendees.

7-time 250cc AMA Supercross champion, and professional short course racer Jeremy McGrath as well as professional off-road short course racer Corry Weller will be at the AIRAID 2015 SEMA Show Booth # 24131 signing autographs. Corry Weller will be at the AIRAID SEMA booth on Wednesday November 4, 2015 from 2:00 PM to 3:00 PM for autographs. Jeremy McGrath will stop by the AIRAID booth the next day on Thursday November 5, 2015 from 12 noon until 1 PM. Don’t miss this opportunity to meet these AIRAID sponsored drivers in person.

The AIRAID 2015 SEMA Show Booth, number 24131, is located in the Las Vegas Convention Center central performance hall not too far from the Chevrolet SEMA booth. AIRAID will be in Las Vegas, Nevada from 11/3/2015 to 11/6/2015 for the 2015 SEMA show.


AIRAID PRODUCT SEARCH     WHERE TO BUY AIRAID

AIRAID Needs Vehicles For New Air Intake Systems & New Vehicle Fitment Checks

AIRAID is hard at work developing new products for the latest vehicles or verifying that existing AIRAID cold air intake systems and related products work with new model year vehicles

AIRAID is hard at work developing new products for the latest vehicles or verifying that existing AIRAID cold air intake systems and related products work with new model year vehicles

If you own one of the vehicles that AIRAID is in need of and are interested in possibly getting a free cold air intake, please reach out to AIRAID by filling out the vehicles needed form online

If you own one of the vehicles that AIRAID is in need of and are interested in possibly getting a free cold air intake, please reach out to AIRAID by filling out the vehicles needed form online

AIRAID is always hard at work developing new products for the latest vehicles or verifying that existing AIRAID cold air intake systems and related products work with new model year vehicles. As a result, AIRAID is always searching for vehicles to check-fit products. It is especially critical when all new models and new model year vehicles begin to hit dealer lots. If you own one of the vehicles that AIRAID is in need of and are interested in possibly getting a free cold air intake in exchange for allowing AIRAID to use your vehicle for intake development, read on.

AIRAID is only looking for the vehicles listed on the AIRAID Needs Vehicles in Phoenix, Arizona page at this time, and the vehicle must be in, or willing to travel to, Phoenix, Arizona

AIRAID is only looking for the vehicles listed on the AIRAID Needs Vehicles in Phoenix, Arizona page at this time, and the vehicle must be in, or willing to travel to, Phoenix, Arizona

Qualifying vehicles must be located in, or willing to travel to, the greater Phoenix, Arizona area only. Should AIRAID select your vehicle, it will be needed for approximately 1-3 days depending on the application. AIRAID will provide a loaner vehicle during that time frame. In exchange for allowing AIRAID to use the vehicle, the owner will be compensated with a free AIRAID air intake system once the product is in production

Please note that AIRAID is only looking for the vehicles listed on the AIRAID Needs Vehicles In Phoenix, Arizona page at this time.  If you own one of the vehicles listed and are interested in getting a free AIRAID Cold Air Intake, please fill out the form on the AIRAID Needs Vehicles In Phoenix, Arizona page and an AIRAID representative will be in touch.

Check the AIRAID Needs Vehicles In Phoenix, Arizona page regularly to for updates, or even Recommend an AIRAID Product for Your Vehicle. Keep up to date on AIRAID new product releases, as well as current events, and Sign up for the AIRAID Newsletter.


AIRAID PRODUCT SEARCH     WHERE TO BUY AIRAID

AIRAID Filters Sponsored Pro 2 Racer Jeremy McGrath Looks To LOORRS Season Finale

AIRAID Air Intake under the hood of VMM

Following a crash at Wild West Motorsports Park the Jeremy McGrath Motorsports team worked to repair the Pro 2 truck for the Las Vegas, Nevada LOORRS rounds 15 and 16

AIRAID Performance Filters supported Jeremy McGrath Motorsports had a busy month of September getting the Pro 2 truck repaired after a massive crash at Wild West Motorsports Park in Sparks, Nevada near Reno, Nevada. Jeremy McGrath, a 7-time 250cc AMA Supercross champion, was fortunate to have walked away from what many people have called one of the worst crashes in off-road short course history. Jeremy McGrath and fellow Pro 2 racer Carl Renezeder made contact at the end of the front straight away where the trucks were reaching speeds of 95 MPH. The Loctite - Fuel Off Road Wheels Pro 2 truck driven by Jeremy McGrath hit the end of a k-rail barrier and took flight. The truck rolled several times before coming to a stop on its roof in the middle of the track. Luckily, McGrath radioed his crew and told them he was okay and getting out of the truck.

AIRAID Air Intake System for VMM

The Loctite - Fuel Off Road Wheels Pro 2 truck ran great for LOORRS round 15 but a rock became wedged in the carburetor linkage forcing Jeremy McGrath to settle for 5th place

Following the crash at Wild West Motorsports Park the Jeremy McGrath Motorsports team worked every day to make all the necessary repairs and get the AIRAID filters equipped Pro 2 ready for the Las Vegas, Nevada rounds 15 and 16 of the Lucas Oil Off-Road Racing Series (LOORRS). "It’s good to be at the track and have a new truck ready to race. Reno is behind us and we want to get back to winning." Jeremy told several fans during the Thursday practice session. The Loctite - Fuel Off Road Wheels Pro 2 truck ran great the next day for LOORRS round 15. Jeremy McGrath started the race from the fourth row but had moved up to the 4th spot by lap 10. On lap 13 bad luck struck again in the form of a rock that became wedged in the carburetor linkage. Jeremy McGrath would have to settle for 5th place in LOORRS round 15 because of limited power.

AIRAID Air Intake under the hood of VMM

The Pro 2 race was the final race of LOORRS round 16 at Las Vegas Motor Speedway and the Jeremy McGrath Motorsports team was excited to race toward a Pro 2 podium finish

On Saturday night the Pro 2 race was the final race of LOORRS round 16 at Las Vegas Motor Speedway. Jeremy McGrath’s Loctite - Fuel Off Road Wheels AIRAID powered Pro 2 truck looked great and the Jeremy McGrath Motorsports team was excited to race toward a podium finish. Jeremy McGrath got an excellent start and was able to pass three trucks by turn one. Jeremy was on the move and heading toward the front before disaster struck on lap 5. A fuel line on the Loctite - Fuel Off Road Wheels Pro 2 truck ruptured and set fire to the truck. LOORRS officials immediately red flagged the race and Jeremy McGrath was able to exit the truck safely. The Lucas Oil Off-Road Racing Series safety crew successfully put out the blaze very quickly.

AIRAID Air Intake System for VMM

Jeremy McGrath got an excellent start in LOORRS round 16 passing three trucks by turn one; however a fuel line on the Loctite - Fuel Off Road Wheels Pro 2 truck ruptured causing a fire

"It was painful to watch this very strong team suffer a malfunction and not finish the race. We all work so hard and love what we do. Off-Road racing can be brutal at times, but we can WIN again! We will go back to the shop and do some testing and try to finish out the year strong at our home track in Lake Elsinore, California on Oct 24th and 25th," said Jeremy McGrath after the disastrous events of Saturday night. The Jeremy McGrath Motorsports team would like to thank all of its partners like Loctite, Fuel Off-Road, Maxxis Tires, AIRAID, Traxxas, Blue Media, Attitude toy haulers, Magnaflow, Rugged Radio, Fox Shox, Rigid Industries, CBR Performance, Makita Tools, 4 Wheel Parts, Alpinestars, Kawasaki, Easy Turf, 3MWraps, Lake Elsinore Motorsports Park, Motive Gear and Lucas Oil.


AIRAID PRODUCT SEARCH     WHERE TO BUY AIRAID

Dodge Ram 1500 Pickup Intake Upgrades from AIRAID, The Performance Intake Company

2013-2015 Ram 1500 Pickup 5.7L HEMI MXP Air Intake System from AIRAID, The Performance Intake Company

2013-2015 Ram 1500 Pickup 5.7L HEMI MXP Air Intake System from AIRAID, The Performance Intake Company

2013-2016 Ram 1500 Pickup 5.7L HEMI Air Intake System 300-277

2013-2016 Ram 1500 Pickup 5.7L HEMI MXP Air Intake System from AIRAID, The Performance Intake Company

The Ram 1500 Pickup, formerly the Dodge Ram, was first introduced in 1981 and was named for the Ram hood ornament which first appeared on Dodge vehicles in 1933. However, this first generation Ram D150 was just a face lifted carryover of the Dodge D-Series which had been around since 1972. The first generation Dodge Ram sold poorly compared to its counterparts from Ford and GM. That is however until 1994 when Dodge introduced the second generation Ram 1500. The fully redesigned 1994 Dodge Ram 1500 immediately became a sales success. Dodge pickup studio designers took styling cues from early 1950’s Studebaker pickup trucks and 18-wheelers to create a “macho” looking truck that completely stood apart from Ford, Chevy, and GMC trucks at the time. The second generation Ram 1500 was named Motor Trend magazine’s truck of the year in 1994 and the Ram pickup line has gone on to win this award four times since.

2002-2008 Dodge Ram 1500 Pickup air intake system 303-190

Third generation 2002-2008 Dodge Ram 1500 Pickup owners have a bolt-on performance option in the way of an AIRAID Cold Air Dam (CAD) air intake system 303-190

Around the same time that Dodge introduced the second generation Ram 1500, AIRAID®, The Performance Intake Company was founded. Since that time AIRAID has become a leading manufacturer of air intake systems. AIRAID has been on board with increasing the performance of MOPAR trucks since the beginning and offers several types of air intake systems for 1994-2015 Dodge Ram 1500, and Ram 1500 Pickups. 1994 to 2001 Dodge Ram 1500 Pickup trucks with 3.9L V6, 5.2L V8, or 5.9L V8 Magnum engines can benefit from an easy bolt-on AIRAID classic air intake system. AIRAID Classic air intakes replace the factory air ducting and air filter box with a mandrel-bent aluminum, or molded HDPE, intake tube and 360-degree conical AIRAID washable & reusable air filter to improve performance. Some classic intake kits include a specially designed air filter splash shield.

Air intake system 301-725 for 2002-2007 Dodge Ram 1500 4.7L V8

AIRAID Jr. Kit intake system 301-725 is for 2002-2007 Dodge Ram 1500 4.7L V8 owners seeking a simple, economical, performance enhancement

Third generation 2002-2008 Dodge Ram 1500 Pickup owners have a bolt-on performance option in the way of an AIRAID Cold Air Dam (CAD) air intake system, AIRAID MXP Air Intake, or even an AIRAID Jr. Kit option. AIRAID Cold Air Dam (CAD) Intake Systems are built upon the principle of cooler air being denser and offering more efficient combustion. AIRAID CAD intake systems utilize Cold Air Dam panels mounted where the factory air box was situated. These panels help keep the air filter isolated from hot engine compartment air by sealing against the underside of the hood with blade-style weather stripping.

air intake system for 1994 to 2001 Dodge Ram 1500 Pickup trucks with 3.9L V6, 5.2L V8, or 5.9L V8 Magnum engine

1994 to 2001 Dodge Ram 1500 Pickup trucks with 3.9L V6, 5.2L V8, or 5.9L V8 Magnum engines can benefit from an easy bolt-on AIRAID classic air intake system

The next evolution in AIRAID performance bolt-on air intake systems is the AIRAID MXP® series. These air intake systems are a premium line of cold air intake systems designed to improve the performance of third and fourth generation Dodge Ram 1500 and Ram 1500 Pickups. The core of an AIRAID MXP intake system is the one-piece rotationally molded polyethylene air filter box which replaces the restrictive factory air box and an AIRAID intake tube constructed of cross-linked high-density polyethylene. AIRAID MXP air intake systems are designed using extensive computer modeling for an easy to install bolt-on performance upgrade without any need for additional modifications or tuning.

AIRAID SynthaFlow air filter media

AIRAID premium filters employ a combination of multiple layers of oiled cotton filter media and a proprietary blend of SynthaFlow synthetic materials

In addition to the Classic, CAD, or MXP line of intakes many Dodge Ram 1500 owners have the option of upgrading to an AIRAID Jr. Kit. An AIRAID Jr. Kit is for those Dodge Ram 1500 owners seeking a simple, economical, performance enhancement. AIRAID Ram 1500 Jr. Kits target the most restrictive components of the factory intake system and replace them with an AIRAID Modular Intake Tube and a premium drop-in replacement washable AIRAID air filter. AIRAID Jr. Kits offer easy installation and a much lower cost than AIRAID Cold Air Dam or Classic Performance Air Intake Systems.

AIRAID SynthaMax air filter media

AIRAID SynthaMax air filters are 100% synthetic SynthaFlow media, non-oiled, air filters and are offered in a colorfast-dyed red, black, or blue SynthaMax air filter media

In addition to offering several styles of air intake systems for Dodge Ram 1500, and Ram 1500 models, AIRAID has revolutionized the automotive aftermarket with two types of air filter technologies available for most AIRAID intakes. AIRAID premium filters employ a combination of multiple layers of oiled cotton filter media and a proprietary blend of SynthaFlow® synthetic materials. AIRAID premium filters offer free-flowing air without sacrificing air filtration efficiency. The second type of air filter technology employed by AIRAID is the SynthaMax® line of 100% synthetic SynthaFlow media, non-oiled, air filters. AIRAID SynthaMax air filters are offered in a colorfast-dyed red, black, or blue SynthaMax air filter media. Both types of AIRAID air filters are washable, reusable, and backed by a “no hassle” lifetime warranty. AIRAID performance filters can be easily cleaned using the AIRAID Filter Tune-Up Kit 790-551, or the Premium Dry Filter Cleaning Solution 790-558.

AIRAID Performance Air Intake Systems For 1994 to 2015 Dodge Ram 1500 and Ram 1500 pickups are listed below:

Years Make Model Engine(s) Air Intake Description Part #
2013-2016 Ram 1500 5.7L AIRAID MXP Air Intake - Oiled Blend 300-277
2013-2016 Ram 1500 5.7L AIRAID MXP Air Intake - Red Synthetic 301-277
2013-2016 Ram 1500 5.7L AIRAID MXP Air Intake - Black Synthetic 302-277
2013-2016 Ram 1500 5.7L AIRAID MXP Air Intake - Blue Synthetic 303-277
2013-2016 Ram 1500 3.6L AIRAID MXP Air Intake W/O Tube - Oiled 300-283
2013-2016 Ram 1500 3.6L AIRAID MXP Air Intake W/O Tube - Red Syn 301-283
2013-2016 Ram 1500 3.6L AIRAID MXP Air Intake W/O Tube - Black Syn 302-283
2013-2016 Ram 1500 3.6L AIRAID MXP Air Intake W/O Tube - Blue Syn 303-283
2011-2012 Ram  1500 4.7L AIRAID MXP Air Intake - Oiled Blend 300-232
2011-2012 Ram  1500 4.7L AIRAID MXP Air Intake - Red Synthetic 301-232
2011-2012 Ram  1500 4.7L AIRAID MXP Air Intake - Black Synthetic 302-232
2011-2012 Ram  1500 4.7L AIRAID MXP Air Intake - Blue Synthetic 303-232
2011-2012 Ram  1500 5.7L AIRAID MXP Air Intake W/O Tube - Oiled 300-236
2011-2012 Ram  1500 5.7L AIRAID MXP Air Intake W/O Tube - Red Syn 301-236
2011-2012 Ram  1500 5.7L AIRAID MXP Air Intake W/O Tube - Black Syn 302-236
2011-2012 Ram  1500 5.7L AIRAID MXP Air Intake W/O Tube - Blue Syn 303-236
2011-2012 Ram  1500 5.7L AIRAID MXP Air Intake - Oiled Blend 300-237
2011-2012 Ram  1500 5.7L AIRAID MXP Air Intake - Red Synthetic 301-237
2011-2012 Ram  1500 5.7L AIRAID MXP Air Intake - Black Synthetic 302-237
2011-2012 Ram  1500 5.7L AIRAID MXP Air Intake - Blue Synthetic 303-237
2008-2010 Dodge Ram 1500 4.7L AIRAID MXP Air Intake - Oiled Blend 300-232
2008-2010 Dodge Ram 1500 4.7L AIRAID MXP Air Intake - Red Synthetic 301-232
2008-2010 Dodge Ram 1500 4.7L AIRAID MXP Air Intake - Black Synthetic 302-232
2008-2010 Dodge Ram 1500 4.7L AIRAID MXP Air Intake - Blue Synthetic 303-232
2009-2010 Dodge Ram 1500 5.7L AIRAID MXP Air Intake W/O Tube - Oiled 300-236
2009-2010 Dodge Ram 1500 5.7L AIRAID MXP Air Intake W/O Tube - Red Syn 301-236
2009-2010 Dodge Ram 1500 5.7L AIRAID MXP Air Intake W/O Tube - Black Syn 302-236
2009-2010 Dodge Ram 1500 5.7L AIRAID MXP Air Intake W/O Tube - Blue Syn 303-236
2009-2010 Dodge Ram 1500 5.7L AIRAID MXP Air Intake - Oiled Blend 300-237
2009-2010 Dodge Ram 1500 5.7L AIRAID MXP Air Intake - Red Synthetic 301-237
2009-2010 Dodge Ram 1500 5.7L AIRAID MXP Air Intake - Black Synthetic 302-237
2009-2010 Dodge Ram 1500 5.7L AIRAID MXP Air Intake - Blue Synthetic 303-237
2006-2008 Dodge Ram 1500 5.7L AIRAID Cold Air Dam (CAD) - Oiled Blend 300-190
2006-2008 Dodge Ram 1500 5.7L AIRAID Cold Air Dam (CAD) - Red Synthetic 301-190
2006-2008 Dodge Ram 1500 5.7L AIRAID Cold Air Dam (CAD) - Black Synthetic 302-190
2006-2008 Dodge Ram 1500 3.7/4.7/5.7L AIRAID Cold Air Dam W/O Tube - Oiled 300-192
2006-2008 Dodge Ram 1500 3.7/4.7/5.7L AIRAID Cold Air Dam W/O Tube - Red Synth 301-192
2006-2008 Dodge Ram 1500 3.7/4.7/5.7L AIRAID Cold Air Dam W/O Tube - Black Syn 302-192
2006-2008 Dodge Ram 1500 3.7/4.7/5.7L AIRAID Cold Air Dam W/O Tube - Blue Syn 303-192
2003-2008 Dodge Ram 1500 5.7L AIRAID MXP Air Intake - Oiled Blend 300-220
2003-2008 Dodge Ram 1500 5.7L AIRAID MXP Air Intake - Red Synthetic 301-220
2003-2008 Dodge Ram 1500 5.7L AIRAID MXP Air Intake - Black Synthetic 302-220
2003-2008 Dodge Ram 1500 5.7L AIRAID MXP Air Intake - Blue Synthetic 303-220
2003-2008 Dodge Ram 1500 5.7L AIRAID Jr. Kit - Oiled Blend 300-724
2003-2008 Dodge Ram 1500 5.7L AIRAID Jr. Kit - Red Synthetic 301-724
2006-2007 Dodge Ram 1500 4.7L AIRAID Cold Air Dam (CAD) - Oiled Blend 300-191
2006-2007 Dodge Ram 1500 4.7L AIRAID Cold Air Dam (CAD) - Black Synthetic 302-191
2006-2007 Dodge Ram 1500 4.7L AIRAID Cold Air Dam (CAD) - Blue Synthetic 303-191
2002-2007 Dodge Ram 1500 4.7L AIRAID Jr. Kit - Oiled Blend 300-725
2002-2007 Dodge Ram 1500 4.7L AIRAID Jr. Kit - Red Synthetic 301-725
2003-2005 Dodge Ram 1500 3.7/4.7/5.7L AIRAID Cold Air Dam W/O Tube - Oiled 300-125-1
2003-2005 Dodge Ram 1500 3.7/4.7/5.7L AIRAID Cold Air Dam W/O Tube - Red Syn 301-125-1
2003-2005 Dodge Ram 1500 3.7/4.7/5.7L AIRAID Cold Air Dam W/O Tube - Black Syn 302-125-1
2003-2005 Dodge Ram 1500 3.7/4.7/5.7L AIRAID Cold Air Dam W/O Tube - Blue Syn 303-125-1
2002-2003 Dodge Ram 1500 3.7/4.7/5.9L AIRAID Cold Air Dam W/O Tube - Oiled 300-125-1
2002-2003 Dodge Ram 1500 3.7/4.7/5.9L AIRAID Cold Air Dam W/O Tube - Red Syn 301-125-1
2002-2003 Dodge Ram 1500 3.7/4.7/5.9L AIRAID Cold Air Dam W/O Tube - Black Syn 302-125-1
2002-2003 Dodge Ram 1500 3.7/4.7/5.9L AIRAID Cold Air Dam W/O Tube - Blue Syn 303-125-1
2002-2005 Dodge Ram 1500 4.7L AIRAID Cold Air Dam (CAD) - Oiled Blend 300-149
2002-2005 Dodge Ram 1500 4.7L AIRAID Cold Air Dam (CAD) - Red Synthetic 301-149
2002-2005 Dodge Ram 1500 4.7L AIRAID Cold Air Dam (CAD) - Black Synthetic 302-149
2002-2005 Dodge Ram 1500 4.7L AIRAID Cold Air Dam (CAD) - Blue Synthetic 303-149
2003-2005 Dodge Ram 1500 5.7L AIRAID Cold Air Dam (CAD) - Oiled Blend 300-150
2003-2005 Dodge Ram 1500 5.7L AIRAID Cold Air Dam (CAD) - Red Synthetic 301-150
2003-2005 Dodge Ram 1500 5.7L AIRAID Cold Air Dam (CAD) - Blue Synthetic 303-150
1994-2001 Dodge Ram 1500 3.9/5.2/5.9L AIRAID Classic Air Intake - Oiled Blend 300-106
1994-2001 Dodge Ram 1500 3.9/5.2/5.9L AIRAID Classic Air Intake - Red Synthetic 301-106
1994-2001 Dodge Ram 1500 3.9/5.2/5.9L AIRAID Classic Air Intake - Black Synthetic 302-106
1994-2001 Dodge Ram 1500 3.9/5.2/5.9L AIRAID Classic Air Intake - Blue Synthetic 303-106

* W/ Hood Mat

Find additional Dodge Ram 1500 or Ram 1500 Pickup performance upgrades from AIRAID, The Performance Intake Company, using the AIRAID Find Products search. Use the Dealers Search tool to find an authorized AIRAID Performance Filters or Performance Intake Systems dealer near you


AIRAID PRODUCT SEARCH     WHERE TO BUY AIRAID

AIRAID Air Filters Have Changed The Industry With Two Kinds of Filter Technology

AIRAID  Drop-In Replacement Air Filters are constructed using premium materials and install  into a vehicle's factory air box as a drop-in replacement for stock paper  filter elements

AIRAID Drop-In Replacement Air Filters are constructed using premium materials and install into a vehicle's factory air box as a drop-in replacement for stock paper filter elements

AIRAID®, The Performance Intake Company, was founded in 1997. AIRAID has revolutionized the automotive aftermarket with two types of air filter technology. AIRAID premium filters employ a combination of multiple layers of oiled cotton filter media and a proprietary blend of SYNTHAFLOW® synthetic materials. AIRAID air filters offer free-flowing air without sacrificing air filtration efficiency. The second type of air filter technology employed by AIRAID is the SYNTHAMAX® line of 100% synthetic SynthaFlow media, non-oiled, air filters. AIRAID SynthaMax air filters are offered in a colorfast-dyed red, black, or blue SynthaMax air filter media.

AIRAID air filters combine layers of red oiled cotton media with SynthaFlow synthetic materials or AIRAID SynthaMax 100% synthetic non-oiled filters available in red, black, or blue

AIRAID air filters combine layers of red oiled cotton media with SynthaFlow synthetic materials or AIRAID SynthaMax 100% synthetic non-oiled filters available in red, black, or blue

AIRAID utilizes its SynthaFlow blended air filter technology, and SynthaMax full synthetic media into an extensive line of premium air filters. AIRAID manufactures everything from small engine breather filters, to drop in replacement style filters, and oversized conical universal air filters for AIRAID intake systems. Both types of AIRAID air filters are washable, reusable, and backed by a “no hassle” lifetime warranty. AIRAID performance filters can be easily cleaned using an AIRAID Filter Tune-Up Kit.

AIRAID universal round air filter and cone filters are available in a variety of shapes and sizes and most AIRAID air filters are available with blended filter media or SynthaMax dry air filter media

AIRAID universal round air filter and cone filters are available in a variety of shapes and sizes and most AIRAID air filters are available with blended filter media or SynthaMax dry air filter media

AIRAID Drop-in Factory Replacement Air Filters for Many Cars, Trucks, and SUVs:

AIRAID drop-in washable replacement air filters install into a vehicle's factory air box and are drop-in replacements for stock paper filter elements. Constructed using the same premium materials used in AIRAID Cold Air Intake Kits, these washable and reusable air filters offer significant improvements in airflow while providing outstanding filtration. AIRAID Drop-In Replacement filters require no modifications and installation is as simple as replacing a stock filter.

AIRAID makes a variety of chrome top or rubber top breather filters with clamp-on, push-on and screw-on mounting options that are also washable and reusable SynthaFlow air filters

AIRAID makes a variety of chrome top or rubber top breather filters with clamp-on, push-on and screw-on mounting options that are also washable and reusable SynthaFlow air filters

AIRAID Universal Air Filters for an Air Intake System Replacement Filter or Custom Application:

When creating a custom air intake system or upgrading another brand’s intake system with AIRAID's superior filter technology, there is sure to be a universal AIRAID Premium Filter to meet your needs. AIRAID universal round air filter and cone filters are available in a variety of shapes and sizes. Most AIRAID universal air filters are available with traditional oiled filter media or SynthaMax dry air filter media in a colorfast-dyed red, black, or blue.

AIRAID Engine Crankcase, Transmission, Differential, or Fuel Tank Breather Filters:

AIRAID makes a variety of chrome top and rubber top breather filters. These washable and reusable breather filters come with clamp-on, push-on and screw-on mounting options. AIRAID premium breather filters are constructed with a blend of oiled cotton filter media and SynthaFlow® synthetic materials to provide high filtration efficiency, as well as high airflow. These filters are legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See airaid.com for CARB status on each part for a specific vehicle.

AIRAID Concept II SynthaMax non-oiled round air filter assemblies for carbureted vehicles feature a beautiful lightweight aluminum lid, and an air cleaner base that enhances airflow

AIRAID Concept II SynthaMax non-oiled round air filter assemblies for carbureted vehicles feature a beautiful lightweight aluminum lid, and an air cleaner base that enhances airflow

Concept II SYNTHAMAX Non-Oiled Round Air Filter Assemblies for Carbureted Vehicles:

Concept II Round Air Filter Assemblies feature a beautiful lightweight aluminum lid. The lid is also perfect for user customization. The curved top enhances airflow and provides additional clearance for the carburetor float bowl vents which can be ideal for applications with minimal hood clearance. Along with a specially designed lid, the Concept II air filter assemblies feature an air cleaner base that enhances airflow. Concept II air filter assemblies are available with 3 inch, 4 inch, and 5 inch elements and feature SynthaMax 100% synthetic, non-oiled, color fast, classic red media.

AIRAID Non-Oiled SynthaMax Helmet Air System Filters For Off-Road Racing or Recreation:

Many off-road racers and recreational enthusiasts use helmet air systems to keep the driver and passengers from eating dust while they also help to keep heads cooler inside the helmet. These helmet air systems rely on an air filter to keep the air pumped into the helmets clean. AIRAID helmet air system filters eliminate the hassle of purchasing, and are more cost-effective than, replacement paper filters. AIRAID helmet air system filters are constructed of premium SynthaMax non-oiled filtration media. The SynthaMax media provides filtration down to 4 microns and acts as an effective barrier from even the finest dust and silt. Servicing the AIRAID helmet air system filters requires only common household cleaner and water.

Find additional performance upgrades from AIRAID, The Performance Intake Company, using the AIRAID Find Products search. Use the Dealers Search tool to find an authorized AIRAID Performance Filters or Performance Intake Systems dealer near you.


AIRAID PRODUCT SEARCH     WHERE TO BUY AIRAID

Dodge Ram 5.7L HEMI Power Enhanced with the AIRAID POWERAID Throttle Body Spacer

AIRAID POWERAID Throttle Body Spacer

AIRAID POWERAID Throttle Body Spacers are machined in the U.S.A. from aircraft quality billet 6061-t6 aluminum; include all necessary gaskets, hardware and precision made brackets

Ram Trucks, formerly the Dodge Ram, are “Made For Those Who Stand Apart.” What better way to stand apart from the crowd with the addition of some billet aluminum bling and enhanced power waiting to be released by the accelerator? An AIRAID POWERAID Throttle Body Spacer is just such an addition to help set the 2009-2015 Ram 1500, 2500, or 3500 apart. AIRAID POWERAID Throttle Body Spacers are designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The AIRAID POWERAID spacer utilizes a patented Helix Bore design to help spin incoming air as it passes through the AIRAID POWERAID throttle body spacer.

AIRAID POWERAID Throttle Body Spacer kit 300-631-1

AIRAID POWERAID Throttle Body Spacer kit 300-631-1 is designed to improve torque and mid-range power for 2009-2015 Dodge Ram 1500, 2500, 3500 pickups with a 5.7L HEMI V8 engine

The action of spinning the air helps boost the velocity of the incoming airflow. This in turn promotes better atomization of the air/fuel mixture as it enters the combustion chamber. The end result of installing an AIRAID POWERAID Throttle Body Spacer is enhanced part-throttle torque and mid-range power. Enhanced part-throttle torque and mid-range power is going to be beneficial in almost any situation; including towing, merging onto a highway, or passing a slow moving vehicle.

2009-2015 Dodge Ram 5.7L Hemi pickup

2009-2015 Dodge Ram 5.7L Hemi pickups are built to stand apart, and it’s easier to do so with billet aluminum and enhanced power from an AIRAID POWERAID Throttle Body Spacer

AIRAID POWERAID Throttle Body Spacers are machined in the U.S.A. from aircraft quality billet 6061-t6 aluminum. AIRAID POWERAID Throttle Body Spacer kits include all necessary gaskets, hardware and precision made brackets. Included with each AIRAID POWERAID Throttle Body Spacer kit are step-by-step installation instructions which include detailed photos. Installation of an AIRAID POWERAID Throttle Body Spacer can typically be completed in around 1 hour and usually will not require drilling or cutting.

M. Fields wrote to AIRAID about his experience with an AIRAID POWERAID on his Ram, “About 5 years ago I bought a PowerAid Throttle Body Spacer and an AIRAID cold air intake for my 2004 Dodge Ram 1500 5.7L hemi. It was fantastic, not only did it improve my power but my fuel mileage went up by 2&1/2 to 3 mpg.” AIRAID POWERAID Throttle Body Spacer kit, number 300-631-1, is designed to improve part-throttle torque and mid-range power for 2009-2015 Dodge Ram 1500, 2500, or 3500 pickups with a 5.7L HEMI V8 engine. It will also fit 2009 Dodge Durango, and 2009 Chrysler Aspen SUV models with a 5.7L HEMI V8.

POWERAID spacer 300-631-1 will work on the following Dodge, Ram, and Chrysler vehicles:

2015 RAM 3500 5.7L V8 F/I
2015 RAM 2500 5.7L V8 F/I
2015 RAM 1500 5.7L V8 F/I
2014 RAM 3500 5.7L V8 F/I
2014 RAM 2500 5.7L V8 F/I
2014 RAM 1500 5.7L V8 F/I
2013 RAM 3500 5.7L V8 F/I
2013 RAM 2500 5.7L V8 F/I
2013 RAM 1500 5.7L V8 F/I
2012 RAM 3500 5.7L V8 F/I
2012 RAM 2500 5.7L V8 F/I
2012 RAM 1500 5.7L V8 F/I
2011 RAM 3500 5.7L V8 F/I
2011 RAM 2500 5.7L V8 F/I
2011 RAM 1500 5.7L V8 F/I
2010 Dodge Ram 1500 Pickup 5.7L V8 F/I
2009 Dodge Ram 3500 Pickup 5.7L V8 F/I
2009 Dodge Ram 2500 Pickup 5.7L V8 F/I
2009 Dodge Ram 1500 Pickup 5.7L V8 F/I
2009 Dodge Durango 5.7L V8 F/I
2009 Chrysler Aspen 5.7L V8 F/I

Find additional Dodge, Ram, or Chrysler performance upgrades from AIRAID, The Performance Intake Company, using the AIRAID Find Products Search. Use the Dealers Search tool to find an authorized AIRAID Performance Filters or Performance Intake Systems dealer near you.


AIRAID PRODUCT SEARCH     WHERE TO BUY AIRAID

2011-2014 Ford Mustang GT 5.0 V8 Race Designed AIRAID Air Intake, 450-303

When it was introduced in 1964, the Ford Mustang was aimed at attracting youthful buyers wanting a fun, but affordable car. While Ford has been able to hold true to this philosophy, the Ford Mustang has earned a reputation in popular culture as a performance driven, often raced, sports coupe. AIRAID, a manufacturer of performance intake systems, was founded in 1997 with the goal of improving the performance of popular cars, trucks, and SUVs. Since the Ford Mustang happens to be one of the most popular American cars of all time, AIRAID has paid special attention to improving its performance.

AIRAID 2011-2014 Ford Mustang GT MXP air intake system, number 450-303, is designed to easily bolt on, but custom tuning is required to utilize the potential power this intake offers for racing

AIRAID 2011-2014 Ford Mustang GT MXP air intake system, 450-303, is designed to easily bolt on, but custom tuning is required to utilize the potential power this intake offers for racing

AIRAID filters can be easily cleaned using the AIRAID Filter Tune-Up Kit or the Premium Dry Filter Cleaning Solution

AIRAID filters can be easily cleaned using the AIRAID Filter Tune-Up Kit or the Premium Dry Filter Cleaning Solution

AIRAID offers several styles of air intake systems for 2011- 2014 Ford Mustang GT 5.0-liter V8 models. In addition to the different designs, most AIRAID 2011-2014 Mustang GT air intake systems can be purchased with optional air filter media, and color choices. But for those 2011-2014 Ford Mustang GT 5.0L owners seeking the ultimate AIRAID intake system designed to boost power for racing, the choice is simple. AIRAID MXP air intake system 450-303, is designed to give a race-inspired boost in performance.

SYNTHAFLOW Oiled Performance Air Filters are an advanced filtration system that allows free-flowing air for high performance, but not at the cost of letting contaminants through

SYNTHAFLOW Oiled Performance Air Filters are an advanced filtration system that allows free-flowing air for high performance, but not at the cost of letting contaminants through

The core of AIRAID MXP intake system 450-303, is the one-piece rotationally molded polyethylene air filter box which replaces the restrictive factory air box. The factory dryer hose like air intake ducting is exchanged for an AIRAID intake tube constructed of cross-linked high-density polyethylene. Molded HDPE air intake tubes allow AIRAID designers to better utilize under hood space and air flow characteristics observed during extensive computer modeling. AIRAID MXP air intake 450-303 includes a washable oiled media premium AIRAID air filter to flow large volumes of air without sacrificing engine protection.

AIRAID 2011-2014 Ford Mustang GT MXP air intake system 450-303, is designed to be easily bolted on, but custom tuning is required to best utilize the potential power this intake offers. The fact that the Mustang’s ECU will require programming means that this air intake system is intended for closed-course race use only and not for use on public streets, or highways. AIRAID air intake systems and premium air filters are backed by a no-hassle warranty. AIRAID filters can be easily cleaned using the AIRAID Filter Tune-Up Kit or the Premium Dry Filter Cleaning Solution. AIRAID air intake systems and premium air filters are made in the USA.

The Ford Mustang has earned a reputation in popular culture as a performance driven, often raced, sports coupe and AIRAID MXP air intake 450-303 can help improve power for racing

The Ford Mustang has earned a reputation in popular culture as a performance driven, often raced, sports coupe and AIRAID MXP air intake 450-303 can help improve power for racing

AIRAID MXP air intake system 450-303, is designed for race use only and will require tuning to enhance the performance of the following Ford Mustang models:

2014 FORD MUSTANG GT 5.0L V8 F/I - Race Specific, Requires Custom Tuning
2013 FORD MUSTANG GT 5.0L V8 F/I - Race Specific, Requires Custom Tuning
2013 FORD MUSTANG BOSS 302 5.0L V8 F/I - Race Specific, Requires Custom Tuning
2012 FORD MUSTANG GT 5.0L V8 F/I - Race Specific, Requires Custom Tuning
2012 FORD MUSTANG BOSS 302 5.0L V8 F/I - Race Specific, Requires Custom Tuning
2011 FORD MUSTANG GT 5.0L V8 F/I - Race Specific, Requires Custom Tuning

Find additional Ford Mustang performance upgrades from AIRAID, The Performance Intake Company, using the AIRAID Find Products Search. Use the Dealer Search tool to find an authorized AIRAID Performance Filters or Performance Intake Systems dealer near you.

Chat Now Chat Now