2016 Cadillac Escalade 6.2L

8 Product Results - Refine Your Results Below
200-111 AIRAID Performance Air Intake System
All Models
In Stock / Free Shipping
Locate A Dealer
Overview
  • Red oiled premium air filter
  • Superior horsepower and acceleration gains
  • Replaces stock intake tubing, air filter and air box
  • Easy to install using commonly available tools
  • High airflow washable and reusable air filter media
  • No Hassle Lifetime Warranty
  • Air filter is protected from the engine compartment hot air
  • Tuned velocity stack for high air flow and mass air sensor functionality
Detailed Info
The AIRAID MXP Air Intake System represents the ultimate in AIRAID’s cold air induction systems and delivers higher levels of horsepower and acceleration gains for specific Chevrolet Silverado, Cadillac Escalade, GMC Sierra, GMC Yukon Denali and GMC Denali XL models. This air intake starts with a replacement one-piece roto-molded air box that addresses all the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This MXP air intake system incorporates a built-in velocity stack, which further promotes airflow, and has provisions for the factory mass air sensor and PCV tubes. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! This air intake system is backed by AIRAID’s No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View this product's vehicle applications to determine the legal status for each vehicle.
Reviews
  • Red oiled premium air filter
  • Superior horsepower and acceleration gains
  • Replaces stock intake tubing, air filter and air box
  • Easy to install using commonly available tools
  • High airflow washable and reusable air filter media
  • No Hassle Lifetime Warranty
  • Air filter is protected from the engine compartment hot air
  • Tuned velocity stack for high air flow and mass air sensor functionality
The AIRAID MXP Air Intake System represents the ultimate in AIRAID’s cold air induction systems and delivers higher levels of horsepower and acceleration gains for specific Chevrolet Silverado, Cadillac Escalade, GMC Sierra, GMC Yukon Denali and GMC Denali XL models. This air intake starts with a replacement one-piece roto-molded air box that addresses all the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This MXP air intake system incorporates a built-in velocity stack, which further promotes airflow, and has provisions for the factory mass air sensor and PCV tubes. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! This air intake system is backed by AIRAID’s No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View this product's vehicle applications to determine the legal status for each vehicle.
DIY Level

Moderate

Installation Time

90 Minutes

Tools Needed

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

200-639 AIRAID Throttle Body Spacer
All Models
In Stock / Free Shipping
Locate A Dealer
Overview
  • Made from aircraft quality billet 6061-T6 aluminum
  • Improves low end torque and throttle response
  • Gaskets, hardware and precision brackets are included
  • Installs in less than 1 hour
  • No drilling or cutting required
  • Provides stronger mid-range power
Detailed Info
The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it’s unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power.
Reviews
  • Made from aircraft quality billet 6061-T6 aluminum
  • Improves low end torque and throttle response
  • Gaskets, hardware and precision brackets are included
  • Installs in less than 1 hour
  • No drilling or cutting required
  • Provides stronger mid-range power
The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it’s unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power.
201-111 AIRAID Performance Air Intake System
All Models
In Stock / Free Shipping
Locate A Dealer
Overview
  • Red dry synthetic premium air filter recommended for everyday street driving
  • Superior horsepower and acceleration gains
  • Replaces stock intake tubing, air filter and air box
  • Easy to install using commonly available tools
  • High airflow washable and reusable air filter media
  • No Hassle Lifetime Warranty
  • Air filter is protected from the engine compartment hot air
  • Tuned velocity stack for high air flow and mass air sensor functionality
Detailed Info
The AIRAID MXP Air Intake System represents the ultimate in AIRAID’s cold air induction systems and delivers higher levels of horsepower and acceleration gains for specific Chevrolet Silverado, Cadillac Escalade, GMC Sierra, GMC Yukon Denali and GMC Denali XL models. This air intake starts with a replacement one-piece roto-molded air box that addresses all the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This MXP air intake system incorporates a built-in velocity stack, which further promotes airflow, and has provisions for the factory mass air sensor and PCV tubes. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! This air intake system is backed by AIRAID’s No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View this product's vehicle applications to determine the legal status for each vehicle.
Reviews
  • Red dry synthetic premium air filter recommended for everyday street driving
  • Superior horsepower and acceleration gains
  • Replaces stock intake tubing, air filter and air box
  • Easy to install using commonly available tools
  • High airflow washable and reusable air filter media
  • No Hassle Lifetime Warranty
  • Air filter is protected from the engine compartment hot air
  • Tuned velocity stack for high air flow and mass air sensor functionality
The AIRAID MXP Air Intake System represents the ultimate in AIRAID’s cold air induction systems and delivers higher levels of horsepower and acceleration gains for specific Chevrolet Silverado, Cadillac Escalade, GMC Sierra, GMC Yukon Denali and GMC Denali XL models. This air intake starts with a replacement one-piece roto-molded air box that addresses all the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This MXP air intake system incorporates a built-in velocity stack, which further promotes airflow, and has provisions for the factory mass air sensor and PCV tubes. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! This air intake system is backed by AIRAID’s No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View this product's vehicle applications to determine the legal status for each vehicle.
DIY Level

Moderate

Installation Time

90 Minutes

Tools Needed

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

202-111 AIRAID Performance Air Intake System
All Models
In Stock / Free Shipping
Locate A Dealer
Overview
  • Black dry synthetic premium air filter
  • Superior horsepower and acceleration gains
  • Replaces stock intake tubing, air filter and air box
  • Easy to install using commonly available tools
  • High airflow washable and reusable air filter media
  • No Hassle Lifetime Warranty
  • Air filter is protected from the engine compartment hot air
  • Tuned velocity stack for high air flow and mass air sensor functionality
Detailed Info
The AIRAID MXP Air Intake System represents the ultimate in AIRAID’s cold air induction systems and delivers higher levels of horsepower and acceleration gains for specific Chevrolet Silverado, Cadillac Escalade, GMC Sierra, GMC Yukon Denali and GMC Denali XL models. This air intake starts with a replacement one-piece roto-molded air box that addresses all the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This MXP air intake system incorporates a built-in velocity stack, which further promotes airflow, and has provisions for the factory mass air sensor and PCV tubes. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! This air intake system is backed by AIRAID’s No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View this product's vehicle applications to determine the legal status for each vehicle.
Reviews
  • Black dry synthetic premium air filter
  • Superior horsepower and acceleration gains
  • Replaces stock intake tubing, air filter and air box
  • Easy to install using commonly available tools
  • High airflow washable and reusable air filter media
  • No Hassle Lifetime Warranty
  • Air filter is protected from the engine compartment hot air
  • Tuned velocity stack for high air flow and mass air sensor functionality
The AIRAID MXP Air Intake System represents the ultimate in AIRAID’s cold air induction systems and delivers higher levels of horsepower and acceleration gains for specific Chevrolet Silverado, Cadillac Escalade, GMC Sierra, GMC Yukon Denali and GMC Denali XL models. This air intake starts with a replacement one-piece roto-molded air box that addresses all the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This MXP air intake system incorporates a built-in velocity stack, which further promotes airflow, and has provisions for the factory mass air sensor and PCV tubes. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! This air intake system is backed by AIRAID’s No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View this product's vehicle applications to determine the legal status for each vehicle.
DIY Level

Moderate

Installation Time

90 Minutes

Tools Needed

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

202-361 AIRAID Performance Air Intake System
All Models
In Stock / Free Shipping
Locate A Dealer
Overview
  • Increases horsepower and torque
  • Replaces stock air box, air filter, and intake tubing
  • Durable powder-coated finish
  • Low-restriction aluminum intake tube
  • Easy to install using standard tools
  • Easy to clean oil-free synthetic air filter
  • Washable and reusable filter
  • NO-Hassle” Lifetime Limited Warranty
Detailed Info
All black components, a black powder-coated aluminum intake tube, and an oil-free SYNTHAMAX® synthetic filter make the AIRAID® MCAD™ intake system your engine’s new best friend - providing an increase in both horsepower and torque. The MCAD™ removes the stock intake track on your vehicle, and adds an open-element air inlet protected by cold air dam panels, which help protect the filter from hot under-hood air. The innovative filter design of layered, low-restriction 3D dry synthetic media offers increased airflow and outstanding protection from contaminants that can cause engine damage and is also washable and reusable. The MCAD™ intake system is designed to mount in the factory location with no drilling required, and installation can typically be completed in less than 90 minutes using standard hand tools. Engineered for durability, you can buy with confidence under AIRAID’s "No-Hassle" Lifetime Limited Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications at to determine the legal status for each vehicle.
Reviews
  • Increases horsepower and torque
  • Replaces stock air box, air filter, and intake tubing
  • Durable powder-coated finish
  • Low-restriction aluminum intake tube
  • Easy to install using standard tools
  • Easy to clean oil-free synthetic air filter
  • Washable and reusable filter
  • NO-Hassle” Lifetime Limited Warranty
All black components, a black powder-coated aluminum intake tube, and an oil-free SYNTHAMAX® synthetic filter make the AIRAID® MCAD™ intake system your engine’s new best friend - providing an increase in both horsepower and torque. The MCAD™ removes the stock intake track on your vehicle, and adds an open-element air inlet protected by cold air dam panels, which help protect the filter from hot under-hood air. The innovative filter design of layered, low-restriction 3D dry synthetic media offers increased airflow and outstanding protection from contaminants that can cause engine damage and is also washable and reusable. The MCAD™ intake system is designed to mount in the factory location with no drilling required, and installation can typically be completed in less than 90 minutes using standard hand tools. Engineered for durability, you can buy with confidence under AIRAID’s "No-Hassle" Lifetime Limited Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications at to determine the legal status for each vehicle.
DIY Level

Moderate

Installation Time

90 Minutes

Tools Needed

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

203-111 AIRAID Performance Air Intake System
All Models
In Stock / Free Shipping
Locate A Dealer
Overview
  • Blue dry synthetic premium air filter`
  • Superior horsepower and acceleration gains
  • Replaces stock intake tubing, air filter and air box
  • Easy to install using commonly available tools
  • High airflow washable and reusable air filter media
  • No Hassle Lifetime Warranty
  • Air filter is protected from the engine compartment hot air
  • Tuned velocity stack for high air flow and mass air sensor functionality
Detailed Info
The AIRAID MXP Air Intake System represents the ultimate in AIRAID’s cold air induction systems and delivers higher levels of horsepower and acceleration gains for specific Chevrolet Silverado, Cadillac Escalade, GMC Sierra, GMC Yukon Denali and GMC Denali XL models. This air intake starts with a replacement one-piece roto-molded air box that addresses all the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This MXP air intake system incorporates a built-in velocity stack, which further promotes airflow, and has provisions for the factory mass air sensor and PCV tubes. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! This air intake system is backed by AIRAID’s No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View this product's vehicle applications to determine the legal status for each vehicle.
Reviews
  • Blue dry synthetic premium air filter`
  • Superior horsepower and acceleration gains
  • Replaces stock intake tubing, air filter and air box
  • Easy to install using commonly available tools
  • High airflow washable and reusable air filter media
  • No Hassle Lifetime Warranty
  • Air filter is protected from the engine compartment hot air
  • Tuned velocity stack for high air flow and mass air sensor functionality
The AIRAID MXP Air Intake System represents the ultimate in AIRAID’s cold air induction systems and delivers higher levels of horsepower and acceleration gains for specific Chevrolet Silverado, Cadillac Escalade, GMC Sierra, GMC Yukon Denali and GMC Denali XL models. This air intake starts with a replacement one-piece roto-molded air box that addresses all the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This MXP air intake system incorporates a built-in velocity stack, which further promotes airflow, and has provisions for the factory mass air sensor and PCV tubes. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! This air intake system is backed by AIRAID’s No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View this product's vehicle applications to determine the legal status for each vehicle.
DIY Level

Moderate

Installation Time

90 Minutes

Tools Needed

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

850-135 AIRAID Replacement Air Filter
All Models
In Stock / Free Shipping
Locate A Dealer
Overview
  • Red oiled filter media
  • Stock replacement filter for better performance
  • Great filtration with low restriction
  • Washable and reusable
  • Simply takes only a few minutes to install
Detailed Info
This AIRAID Direct-Fit Replacement Filter is a drop-in replacement for your vehicle’s stock paper air filter that is designed to improve horsepower and acceleration. The air filter is constructed with multiple layers of filter media and provides significant improvements in air flow and filtration compared to typical replacement filters with the added benefit of being washable and reusable. Why throw money away on a paper filter each time the old one gets dirty when you can upgrade to a serviceable AIRAID Direct-Fit Replacement Filter for often less than the cost of two stock replacements? Installation takes only minutes and is as simple as replacing your stock filter.
Reviews
  • Red oiled filter media
  • Stock replacement filter for better performance
  • Great filtration with low restriction
  • Washable and reusable
  • Simply takes only a few minutes to install
This AIRAID Direct-Fit Replacement Filter is a drop-in replacement for your vehicle’s stock paper air filter that is designed to improve horsepower and acceleration. The air filter is constructed with multiple layers of filter media and provides significant improvements in air flow and filtration compared to typical replacement filters with the added benefit of being washable and reusable. Why throw money away on a paper filter each time the old one gets dirty when you can upgrade to a serviceable AIRAID Direct-Fit Replacement Filter for often less than the cost of two stock replacements? Installation takes only minutes and is as simple as replacing your stock filter.
DIY Level

Moderate

Installation Time

20 Minutes

Tools Needed

Screwdriver

851-135 AIRAID Replacement Dry Air Filter
All Models
In Stock / Free Shipping
Locate A Dealer
Overview
  • Easy to clean oil-free red synthetic air filter
  • Stock replacement filter for better performance
  • Great filtration with low restriction
  • Washable and reusable
  • Simply takes only a few minutes to install
Detailed Info
This AIRAID Direct-Fit Replacement Filter is a drop-in replacement for your vehicle’s stock paper air filter that is designed to improve horsepower and acceleration. The air filter is constructed with multiple layers of filter media and provides significant improvements in air flow and filtration compared to typical replacement filters with the added benefit of being washable and reusable. Why throw money away on a paper filter each time the old one gets dirty when you can upgrade to a serviceable AIRAID Direct-Fit Replacement Filter for often less than the cost of two stock replacements? Installation takes only minutes and is as simple as replacing your stock filter.
Reviews
  • Easy to clean oil-free red synthetic air filter
  • Stock replacement filter for better performance
  • Great filtration with low restriction
  • Washable and reusable
  • Simply takes only a few minutes to install
This AIRAID Direct-Fit Replacement Filter is a drop-in replacement for your vehicle’s stock paper air filter that is designed to improve horsepower and acceleration. The air filter is constructed with multiple layers of filter media and provides significant improvements in air flow and filtration compared to typical replacement filters with the added benefit of being washable and reusable. Why throw money away on a paper filter each time the old one gets dirty when you can upgrade to a serviceable AIRAID Direct-Fit Replacement Filter for often less than the cost of two stock replacements? Installation takes only minutes and is as simple as replacing your stock filter.
DIY Level

Moderate

Installation Time

20 Minutes

Tools Needed

Screwdriver

Chat Now Chat Now